물리 주소 확장 PAE : Physical Address Extension

PAE 라는 것이 있더군요..MSDN에 있는 걸 올려봅니다.



http://www.microsoft.com/technet/prodtechnol/windowsserver2003/ja/library/ServerHelp/0a8f5c3b-a892-49af-bf94-794283697239.mspx?mfr=true

물리 주소 확장

(PAE : Physical Address Extension)

최종 갱신일: 01/21/2005

 

물리 주소(PAE) X86

 

물리 주소(PAE : Physical Address Extension) X86 사용하면 주소 윈도우화(AWE : Address Windowing Extensions) API 세트를 사용하여 Intel Pentium Pro 이상의 프로세서와 4GB 이상의 물리 메모리를 탑재하고 있는 컴퓨터에서행 하고 있는 소프트웨어가 보다 많은 물리 메모리를 애플리케이션의 가상 address  공간에 맵 할 수 있습니다.

AWE API 세트를 사용하지 않는 애플리케이션도 PAE X86 헤택을 받을 수 있습니다.오페레 시스템이 보다 물리 메모리를 사용하는 것으로 징이 감소하고 퍼포먼스가 향상하기 때문입니다. 의 애플리케이션을 호스트 하고 있는 통합 서버도 혜택을 받습니다.

대량의 타를 조작하는 애플리케이션이 하드 디스크 대신에 메모리에 타를 유지하는 것으로  퍼포스가 향상합니다. 예를 들어 PAE X86에서는 다음과 같은 애플리케이션의 퍼포스가 큰 폭으로 향상됩니다.

데이터베이스.  Microsoft SQL/E 7.0 이후 .

및 엔지니어링 애플리케이션. 유체역의 계산 등 .

장적인 데 마이닝을 실시하는 통계 분석 애플리케이션 .


PAE X86
으로의 갱신

행 페지 보호라고도 불리는 데행 방지(DEP) 추가를 지원 하기 위해서 다음의 갱신을 하고 있습니다.

행 페지 보호 기능을 지원 하는 프로세서를 탑재하고 있는 컴퓨터상에서 DEP 할 때는 Windows Server 2003 Service Pack 1 (SP1) Windows XP Service Pack 2 (SP2) 행 하는 컴퓨터상에서 PAE 자동적으로 하게 됩니다. 

Windows Server 2003, Standard Edition SP1 Windows XP SP2에서 PAE 드가 유 할 때는 물리 주소 공간이 4GB으로 제한됩니다. 물리 주소 공간을 4GB 제한하면 PAE 드에한 드라이버의 호환성의 문제를 막는데 도움이 됩니다 .

 

특정 드웨어만으로 PAE X86 지원 되고 있으므로 오퍼레 시스템의 인스턴트 시에 이 기능은 유 하지 않습니다. Windows Server 2003 패밀리 제품의 드웨어 호환성 정보를 확인하고 하드웨어로 PAE X86 지원 되고 있는지 어떤지를 판단 합니다. 이 정보는 「 리소 」에서 적절한 링크를 클릭해색 할 수 있습니다. PAE X86 하게 하는 방법의 상세하게 대해서는 물리 주소 (PAE) 하게 한다 」를 참고 해 주세요.

 

토픽은 Windows Server 2003, Web Edition에는 적용되지 않습니다.

 

 

http://www.microsoft.com/japan/whdc/system/platform/server/PAE/default.mspx

Physical Address Extension - PAE 설계

 

PAE - Physical Address Extension Intel 제공하는 메모리 주소 확장 기능으로 프로세서가 이것을 이용 하면 물리 메모리의 어드레싱에 사용 할 수 있는 비트 32비트에서 36비트로 확장 할 수 있습니다. 이것은 ,Address Windowing Extensions(AWE) API 사용 하고 있는 애플리케이션을 호스트 오퍼레 시스템이 지원 하는 것으로써 실현 합니다.

PAE 32 비트(IA-32) Intel Pentium Pro 그것 이후의 플랫폼의 대부분에서 작하고 있는 애플리케이션 해 최대 64GB 물리 메모리를 원합니다. PAE 지원은 Microsoft® Windows® XP, Windows 2000 Windows Server™ 2003 오퍼레 시스템에서 제공됩니다.

이러한 시스템에서 지원 되고 있는 디바이스에는 Windows 드웨어 호환성 테스트의 특별한 요건이 적용됩니다.

PAE Windows 패밀리 오퍼레 시스템의 32 비트 버전에서만 지원 됩니다. Windows 64 비트 버전PAE 지원 하지 않습니다. 64 비트 시스템용의 드웨어 및 드라이버의 설계에 대해서는 64 비트 참고 해 주세요.

 

PAE 지원

Operating Systems and PAE Support

PAE Memory and Windows

메모리 Windows 시스템

Windows XP SP2 메모리 보호 기술

 

카탈로그

Datacenter 서버 카탈로그

Windows Server 2003,  Datacenter Edition 드라이버 프로그램의

Fault Tolerant 서버 카탈로그

 

 

 

 

 

 

 

 

 

 

 

http://www.microsoft.com/whdc/system/platform/server/PAE/PAEdrv.mspx

 

Physical Address Extension - PAE Memory and Windows

Updated: February 9, 2005

Related Links

Operating Systems and PAE Support

On This Page

Introduction

System Board Issues: DAC Capabilities for Buses

Adapter and Driver Issues: LME and DAC Capable

General Guidelines for LME Drivers

Guidelines for NDIS Miniports and SCSI Miniports

Creating and Testing LME Drivers

Troubleshooting DAC Support and LME Drivers

Call to Action for LME and DAC Capable Cevices

Introduction

PAE is an Intel-provided memory address extension that enables support of greater than 4 GB of physical memory for most 32-bit (IA-32) Intel Pentium Pro and later platforms. This article provides information to help device driver developers implement Windows drivers that support PAE.

Microsoft supports Physical Address Extension (PAE) memory in Microsoft Windows 2000, Windows XP, and Windows Server 2003 products:

Operating system

Maximum memory support with PAE

Windows 2000 Advanced Server

8 GB of physical RAM

Windows 2000 Datacenter Server

32 GB of physical RAM

Windows XP (all versions)

4 GB of physical RAM*

Windows Server 2003 (and SP1), Standard Edition

4 GB of physical RAM*

Windows Server 2003, Enterprise Edition

32 GB of physical RAM

Windows Server 2003, Datacenter Edition

64 GB of physical RAM

Windows Server 2003 SP1, Enterprise Edition

64 GB of physical RAM

Windows Server 2003 SP1, Datacenter Edition

128 GB of physical RAM

* Total physical address space is limited to 4 GB on these versions of Windows.

PAE is supported only on 32-bit versions of the Windows operating system. 64-bit versions of Windows do not support PAE. For information about device driver and system requirements for 64-bit versions of Windows, see 64-bit System Design.

Although support for PAE memory is typically associated with support for more than 4 GB of RAM, PAE can be enabled on Windows XP SP2, Windows Server 2003, and later 32-bit versions of Windows to support hardware enforced Data Execution Prevention (DEP).

Operating System Support. The PAE kernel is not enabled by default for systems that can support more than 4 GB of RAM.

To boot the system and utilize PAE memory, the /PAE switch must be added to the corresponding entry in the Boot.ini file. If a problem should arise, Safe Mode may be used, which causes the system to boot using the normal kernel (support for only 4 GB of RAM) even if the /PAE switch is part of the Boot.ini file.

The PAE mode kernel requires an Intel Architecture processor, Pentium Pro or later, more than 4 GB of RAM, and Windows 2000, Windows XP, or Windows Server 2003.

The PAE kernel can be enabled automatically without the /PAE switch present in the boot entry if the system has DEP enabled (/NOEXECUTE switch is present) or the system processor supports hardware-enforced DEP. Presence of the /NOEXECUTE switch on a system with a processor that supports hardware-enforced DEP implies the /PAE switch. If the system processor is capable of hardware-enforced DEP and the /NOEXECUTE switch is not present in the boot entry, Windows assumes /NOEXECUTE=optin by default and enables PAE mode. For more information, see the topic "Boot Options in a Boot.ini File" in the Windows DDK.

Top of page

System Board Issues: DAC Capabilities for Buses

Various chipsets are capable of supporting more than 4 GB of physical memory. By using PAE, the Windows Datacenter and Advanced Server operating systems can use this memory.

On a 64-bit platform, for optimal performance, all PCI adapters (including 32-bit PCI adapters) must be able to address the full physical address space. For 32-bit PCI adapters, this means that they must be able to support the Dual Address Cycle (DAC) command to permit them to transfer 64-bit addresses to the adapter or device (that is, addresses above the 4 GB address space). Adapters that cannot provide this support cannot directly access the full address space on a 64-bit platform.

Unfortunately, Microsoft is finding that not all PCI buses on a system board support DAC, which is required for a 32-bit PCI adapter to address more than 4 GB of memory. Furthermore, there is no way for a DAC-capable PCI device (or its associated driver) to know that it is running on a non-DAC-capable bus.

Given these issues in hardware, Microsoft must find the optimal software workaround in the operating system from the standpoint of customers, OEMs, and Microsoft. This section discusses several possible software solutions that have been rejected due to various inadequacies, and then discusses the selected solution.

Overriding Dma64BitAddress = Performance and Stability Problems
One software workaround would require the operating system to override the Dma64BitAddresses flag passed by the driver to HalGetAdapter: if the driver passes TRUE and its device is on a bus that does not support DAC, force this to FALSE. That causes the hardware abstraction layer (HAL) to double-buffer transfers done through IoMapTransfer or GetScatterGatherList, so the device never sees an address above 4 GB. For more information, see the "Double-Buffer DMA Transfer" topic in the Windows DDK.

Unfortunately, HalGetAdapter does not have the necessary information to determine the bus of the caller's device. All that can be known is the contents of the DEVICE_DESCRIPTION structure that the driver provides, where the only relevant information is that the InterfaceType is PCI.

typedef struct _DEVICE_DESCRIPTION {
ULONG Version;
BOOLEAN Master;
BOOLEAN ScatterGather;
BOOLEAN DemandMode;
BOOLEAN AutoInitialize;
BOOLEAN Dma32BitAddresses;
BOOLEAN IgnoreCount;
BOOLEAN Reserved1;   // must be false
BOOLEAN Dma64BitAddresses;
ULONG BusNumber;     // unused for WDM
ULONG DmaChannel;
INTERFACE_TYPE  InterfaceType;
DMA_WIDTH DmaWidth;
DMA_SPEED DmaSpeed;
ULONG MaximumLength;
ULONG DmaPort;
} DEVICE_DESCRIPTION, *PDEVICE_DESCRIPTION;

In addition:

Double-buffering has been shown in testing at Microsoft to have a negative performance impact on I/O throughput and CPU utilization. This negative impact increases as more memory is added beyond 4 GB.

The delays associated with high-performance I/O and double-buffering might cause timing issues for drivers and devices, which would negatively impact system stability.

All of this is contrary to the goals of Windows Datacenter and Advanced Server to ensure increased scalability and reliability.

IoGetDmaAdapter = Not Used by All Drivers
Windows Driver Model (WDM) introduced the call, IoGetDmaAdapter(), which is similar to HalGetAdapter, but also takes a pointer to the physical device object (PDO). This allows the operating system to detect the caller's PCI bus and whether it is a child device of a non-DAC bus. Then the PCI driver could override the Dma64BitAddress field in DEVICE_DESCRIPTION so that the HAL thinks the device can handle only 32-bit addresses.

The problem with this approach is that not all drivers use IoGetDmaAdapter. Many still use HalGetAdapter, even though the recent DDKs specifically define this as an obsolete call. Microsoft has no way of preventing third-party drivers from calling HalGetAdapter; forcing drivers to use IoGetDmaAdapter by failing the call would render many otherwise capable drivers as no longer functional. Requiring all drivers to use IoGetDmaAdapter would create enormous test and performance issues.

Incorrect or No DMA Routines = No Possible Workaround
Regardless whether IoGetDmaAdapter or HalGetAdapter is used, not all drivers use the DMA routines correctly. Some do not use them at all because of the performance impact. It would be no surprise to find 64-bit capable drivers that ignore the DMA routines because they "know" they do not need such routines. In such cases, there is no possible operating system workaround--all offending drivers would have to be found and fixed.

Boot Device on Non-DAC Bus / All Non-DAC Buses = No Large Memory Support
Besides the many problems of non-DAC buses described above, there are two special cases:

Boot Device on Non-DAC Bus. The first is the case where the boot device is on a non-DAC bus. Given that a pagefile usually resides on the boot device and this is a primary data path, then all pagefile I/O would be forced to be double buffered, negatively impacting system performance and possibly leading to system instability.

All Non-DAC Buses. The second case is where all buses are non-DAC, in which case the user has no option of moving DAC adapters, LME-capable adapters, or both to DAC buses. The only solution in such a case is to limit memory support to 4 GB, regardless of whether the processor, memory controller, or system board physically support more than 4 GB of RAM.

Microsoft does not expect any instances of the second case and few of the first, but must take these possibilities into account in defining the overall solution.

Selected Solution: Disable Memory Above 4 GB when Non-DAC Buses Exist
Because Microsoft has no reliable software workaround for this problem, the only viable alternative is to disable configurations that do not work and inform the administrator of the problem. Disabling all memory above 4 GB if there are any non-DAC buses is one way to prevent instability in this case. Microsoft thinks that this is the best solution for customers, because it is the least likely to destabilize the platform.

The following table summarizes this information.

Bus

Adapter

Result

DAC

DAC

Highest performance and stability.

DAC

Non-DAC

Double buffering required. 1 2

Non-DAC

DAC

Memory corruption possible due to non-compliance with PCI standard; Windows takes specific actions to avoid.3

Non-DAC

Non-DAC

Double buffering required.4

 

1

In these cases, there is still an opportunity for memory corruption, even with 32-bit devices on 32-bit buses using 32-bit drivers, as described in Note 2.

2

The decision to double-buffer is made on a per-transfer basis. It is the same algorithm used to determine whether a DMA transfer to a 24-bit (ISA) adapter should be double buffered.
Double buffering occurs for a given transfer if the physical address of the DMA memory is at an address higher than the adapter can reach. Previously, an adapter that could access all 32 bits of physical address space would set the Dma32BitAddresses field in the DEVICE_DESCRIPTION structure passed into HalGetAdapter. Similarly, an adapter that could access all 64 bits of physical address space would set the Dma64BitAddresses field in the same structure.
If a buffer with a physical address greater than 4 GB is passed to IoMapTransfer, the adapter object is examined. If it is found to be for an adapter that did not set the Dma64BitAddresses field, then a suitable low-memory buffer is found, and the data is copied before or after the transfer (depending on whether the data was going to or coming from the adapter, respectively).

3

Systems having a non-DAC bus are detected at boot time and Windows disables memory above 4 GB by not using the PAE kernel in order to prevent memory corruption and system instability.

4

In these cases, there is still an opportunity for memory corruption, even with 32-bit devices on 32-bit buses using 32-bit drivers, as described in Note 2.

If you, the IxV, have and test user-mode code [and this is almost universally true] this is a test scenario you must cover. You must make sure that the code you are testing can deal correctly with high virtual addresses, especially above 2 GB. Windows should be tested with your applications or utilities to ensure they work.

Usually, VirtualAlloc returns virtual addresses in low -> high order. So, unless your process allocates a lot of memory or it has a very fragmented virtual address space, it will never get back very high addresses. This is possibly hiding bugs related to high addresses. There is a simple way to force allocations in top -> down order in Windows Server 2003, Datacenter Edition and Enterprise Edition operating systems and this can reveal important bugs.

You need to set HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management\AllocationPreference REG_DWORD = 0x100000

All applications, but especially those applications that are built with LINKER_FLAGS=/LARGEADDRESSAWARE in the sources file, should be tested with the /PAE, /NOLOWMEM and /3GB switches, and the registry change.

No special hardware is required for MEM_TOP_DOWN testing. Any machine running Windows Server 2003, Datacenter Edition or Enterprise Edition operating systems supports this testing.

MEM_TOP_DOWN can also be used on Itanium-based systems. However, /3GB is an x86-specific feature.

The /PAE, /NOLOWMEM and /3GB switches, and the registry change, can be used at once. Note that /3GB will prevent access to physical memory beyond 16 GB because the kernel memory space is reduced with the /3GB switch, and thus does not have enough room for the additional Page Table Entries required when memory is larger than 16 GB.

Top of page

Adapter and Driver Issues: LME and DAC Capable

All physical memory is treated as general-purpose memory, so no new APIs are needed to access I/O above the 4 GB physical memory address. Also, direct I/O can be done for greater than 4 GB physical addresses--this requires DAC-capable or 64-bit PCI devices. Devices and drivers that can perform direct I/O beyond 4 GB are considered Large Memory Enabled (LME).

Because Windows does not have a kernel PAE or LME API or interface, the PAE-X86 kernel ensures that many items are identical to the standard kernel, including:

Kernel memory space organization is unchanged.

PCI Base Address Registers [BAR] remains the same.

Registry flags work the same.

Non-paged pool size remains the same.

3GT feature is supported for up to 16 GB RAM.

IMAGE_FILE_LARGE_ADDRESS_AWARE continues to work.

"Well known" kernel addresses remain in the same locations.

However, careful device driver development is still required. Hardware devices should be DAC-capable or 64-bit capable with LME drivers; otherwise, the device will function as "legacy" 32-bit and will be double buffered, with lower relative performance.

Although double-buffering can have a relatively small impact (single percentage points) on 8 GB systems, this is enough to impact I/O intensive tasks such as database activity. This is also dependent on a number of factors beyond Microsoft's control, such as hardware design and device driver optimizations like interrupt moderation and efficient use of the PCI bus. As the amount of physical memory increases, so does the negative performance impact in comparison to DAC/64-bit devices and LME drivers.

Top of page

General Guidelines for LME Drivers

The following guidelines aid in preventing LME driver failures:

Do not use PVOID64. Using PVOID64 anywhere will return incorrect information, because this call does not return valid information on the Intel Architecture platform. Instead, use PHYSICAL_ADDRESS.

Note: This does not apply for NDIS miniports. Also, miniports, such as USB and others that are relatively low performance, need not be rewritten to be LME, because the performance gain or loss is not significant. These miniports, however, should correctly use the kernel interfaces for Windows and not try to trick the operating system by use of undocumented and unsupported shortcuts.

Do not call MmGetPhysicalAddress() on a locked buffer, discard the high 32 bits, and then program the adapter to DMA into the resultant address. This will certainly result in corrupted memory, lost I/O, and system failure. If this call is made, ensure that all address information returned is used and that the driver correctly operates with that 64-bit address.

Do not use PVOID when manipulating physical addresses. Because PVOID is only 32 bits, address truncation will take place and memory corruption will result.

Do not use ULONG when manipulating physical addresses, because this has exactly the same precautions and behavior as PVOID: system failure.

Do not indicate support for scatter/gather in the DEVICE_DESCRIPTION when not true in an attempt to avoid the buffering provided by HAL (the "mapping registers").

If the driver cannot support 64-bit addresses, do not call IoMapTransfer(...) without having an AdapterControl(...) function (again, to avoid mapping registers), and do not supply zero as the value for MapRegisterBase. This will fail.

Other functions and calls might cause failures. Information is provided in the Windows DDK.

Top of page

Guidelines for NDIS Miniports and SCSI Miniports

Guidelines for NDIS Miniports on PAE Systems

Network adapters that are 64-bit address capable should:

Use the NDIS scatter/gather DMA model.
Miniports need to call NdisMInitializeScatterGatherDma with Dma64Addresses = TRUE.

Use the NDIS deserialized miniport driver model.
Miniports should be deserialized for optimum performance on Windows Datacenter and Advanced Server operating systems.

See the entry for NdisMInitializeScatterGatherDma in the DDK documentation.

General Guidelines

The following should be noted for NDIS miniports:

Shared memory allocated using NdisMAllocateSharedMemory is guaranteed not to cross a 4 GB boundary.

NDIS_PER_PACKET_INFO_FROM_PACKET(ScatterGatherListPacketInfo) will never return NULL for miniports that support scatter/gather DMA.

The physical address range indicated by SCATTER_GATHER_ELEMENT will not cross a 4-GB boundary. If a virtual memory buffer does cross a 4-GB boundary, it will be broken into two scatter/gather elements.

Guidelines for 32-Bit Address-Only Network Devices

The following guidelines are recommended for 32-bit address-only network devices:

Properly written NDIS drivers will work as-is on PAE systems, but will have a significant negative performance impact that grows as the amount of installed RAM increases.

NdisMStartBufferPhysicalMapping will copy all fragments above the 4 GB address space to memory that is below the 4 GB mark.

Guidelines for 64-bit Address-Capable SCSI Miniports

(including all related adapters for SCSI 2)

The following guidelines are recommended for 64-bit address-capable SCSI miniports:

Miniports need to support scatter-gather DMA. They must not call any of the slave-mode DMA routines: ScsiPortFlushDma or ScsiPortIoMapTransfer.

Miniports should check the value of Dma64BitAddresses in PORT_CONFIGURATION_INFORMATION to determine whether 64-bit physical addresses are supported. If 64-bit physical addresses are supported, the miniport should change its extension sizes to account for the larger physical addresses (if necessary) and set the Dma64BitAddresses field to SCSI_DMA64_MINIPORT_SUPPORTED before calling ScsiPortGetUncachedExtension.

Miniports must not attempt to access data buffers using virtual addresses unless they have set the MapBuffers bit in the PORT_CONFIGURATION_INFORMATION structure. The exceptions to this rule are INQUIRY and REQUEST_SENSE operations that will always have a valid virtual address.

Use SCSI_PHYSICAL_ADDRESS to access all physical addresses.

Uncached extensions and SRB extensions will not cross the 4 GB boundary.

No scatter/gather element will cross the 4 GB boundary.

Guidelines for Legacy SCSI Miniports

The following guidelines are recommended for legacy SCSI miniports:

Miniports need to support scatter/gather DMA. They must not call any of the slave-mode DMA routines: ScsiPortFlushDma or ScsiPortIoMapTransfer.

Miniports must not attempt to access data buffers using virtual addresses unless they have set the MapBuffers bit in the PORT_CONFIGURATION_INFORMATION structure. The exceptions to this rule are INQUIRY and REQUEST_SENSE operations that will always have a valid virtual address.

Miniports should not set the MapBuffers bit unless absolutely necessary, because providing valid virtual addresses to a 32-bit driver on a LME system is costly.

Top of page

Creating and Testing LME Drivers

Use the following checkpoints to create and test LME drivers:

Do not try to add more features into the driver when modifying it for a Large Memory system. Instead, modify the driver as little as possible to ensure LME capabilities.

Always use the most recent version of the Hardware Compatibility Test (HCT) provided at: http://www.microsoft.com/whdc/DevTools/HCTKit.mspx.

Test both on systems with greater than 4 GB of physical memory and on systems with less than 4 GB of system memory, using all the available tools from Microsoft.

Test legacy drivers to ensure there is no corruption due to incorrect use of calls such as MmGetPhysicalAddress.

Test specifically for PAE systems. This requires a minimum installed RAM of 6 GB.

Test using the NOLOWMEM switch in the Boot.ini file:

Guarantees a 64-bit physical address above 4 GB.

Hides pages below 4 GB.

Fills pages below 4 GB with unique patterns.
Task Manager will display roughly total RAM minus ~4 GB.

Test using the /3GB switch simultaneously

Changes the kernel memory environment and exposes issues with drivers

Reduces the kernel memory space to 1 GB

Test using the MEM_TOP_DOWN registry setting
This forces all allocations for memory to be allocated from the top down, instead of the normal bottom up.
Set HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management\AllocationPreference REG_DWORD = 0x100000

Test using DevCtl, which is supplied with the HCT:

Deliberately attacks drivers through IOCTLs.

Tests exception handling and failure modes, and tests unexpected entry points into the driver.

Queries with buffers too small to contain returns.

Checks IOCTL/FSCTL for:
- Missing, small, or garbage buffers
- Data changing asynchronously
- Bad pointers
- Buffer mapping changing asynchronously.

Issues requests both synchronously and asynchronously to the device.

Tests IRP cancels, delays and nulls

Checks leak, pooltag, and lookaside information.

Test using Driver Verifier (provided with Windows):

All pool allocations are segregated to check for corruption.

Tests using extreme memory pressure--whenever IRQL or spinlock is acquired, try to page out the driver; catches fatal errors.

All spinlock, IRQL and pool requests and releases are extensively error checked: double releases of spinlocks, usage of uninitialized variables, other forms of pool corruption, and so on.

Top of page

Troubleshooting DAC Support and LME Drivers

The following checkpoints can help OEMs, IHVs and customers determine whether there are any issues relating to the system board, buses, or adapters in supporting DAC and LME.

If the driver fails at initialization, check with the system OEM to determine whether all PCI buses present in the system support DAC.

If a network adapter driver performs a bug check immediately upon a network connection, determine whether all buses support DAC, again by checking with the OEM.

If the PCI buses on the system are all DAC capable, check whether the hardware device is compliant with PCI 2.1.

If the bus supports DAC and the device is PCI 2.1 compliant, check the driver for assumptions being made about physical addresses.

Documentation is provided in the Windows DDK about PAE memory support. A summary of the information for customers is included in the following sections.

Hardware Requirements for PAE

The system must meet the following minimum requirements:

x86 Pentium Pro processor or later

More than 4 GB of RAM

450 NX or compatible chipset and support, or later

Enabling PAE

To enable PAE:

Locate the Boot.ini file, which is typically in the root folder (for example, C:/) and remove its Read-Only and Hidden attributes.

Open the Boot.ini file with a text editor, and then add the /PAE parameter to the ARC path, as shown in the following example:

multi(0)disk(0)rdisk(0)partition(2)
\WINNT="Windows ???? Datacenter Server" /PAE /basevideo /sos

On the File menu, click Save.

Restore the Read-Only attribute to the Boot.ini file.

Troubleshooting Specific Programs

Following are two examples of problems that might occur, with solutions that will rectify the problem.

Problem: The computer will not start after PAE is enabled.

Cause: Your hardware may not support PAE.

Solution: Start the system and run Safe Mode, which disables PAE. Then remove the /PAE parameter from the Boot.ini file.

To run Safe Mode:

1.

When you see the message "Please select the operating system to start," press F8.

2.

Use the arrow keys to highlight the appropriate Safe Mode option, and then press ENTER.
To use the arrow keys on the numeric keypad to select items, NUMLOCK must be off.

Problem: After PAE is enabled, the computer runs for a time and then displays a Stop error.

Cause: Your hardware may not support PAE.

Solution: Contact your hardware vendor for a driver update. If your hardware or driver is not capable of supporting PAE, disable PAE by removing the /PAE parameter in the Boot.ini file. If you must disable PAE but your system processor supports hardware-enforced DEP, add /NOPAE /NOEXECUTE=alwaysoff to your Boot.ini file. Note: This will disable the DEP feature on your computer.

Top of page

Call to Action for LME and DAC Capable Cevices

Driver developers should follow the guidelines in this article to ensure that their devices are LME and DAC capable.

System manufactures should ensure that only DAC-capable buses are included in any system design intended to support Large Memory capabilities.

Requirements for Large Memory capabilities are defined in Microsoft Windows Logo Program System and Device Requirements.

신고

이 글은 "씨디맨" 의 동의 없이 전문 재배포 금지. 링크 및 트랙백은 허가 없이 무제한 허용 *  [자세히보기]

질문 또는 댓글을 남겨 주세요.

질문글은 무조건 답변 드리겠습니다. 이곳에 질문을 올려주세요.
이 글과 연관이 없는 급한 질문은 빠른 질문/답변을 이용해 주세요!

댓글 입력 폼

:)   :(   --;   :D   :O   :x   r:r   g;g   i;t   s;s

     이미지 업로드  [무료이미지 업로드 방법 설명]

  1. yuanfen 2011.07.20 12:54 신고

    The gorgeous charms in Trollbeads comprise animals, birds, chicken, Elephant, kitten, lamb, cobra, fish, ladybug, butterfly, lion, giraffe, terrier, monkey, seals, horses, frogs, dolphins, snails, teddy bear, http://www.tiffanyscheapjewellery.com/ jelly fish, porcupine, chick, and mouse. gorgeous complications like heart, letter beads, endless, scrolls, faith, hope, charity, friendship, adventure, and adore all may perhaps correctly be enclosed in these complications to generate yours unforgettable pieces.

    perm. |  mod/del. |  reply.
  2. doctor notes 2011.10.15 12:19 신고

    I think there are people have similar thought with you too, and I have the same thing in my mind also. Thanks for this interesting post though.

    perm. |  mod/del. |  reply.